If you’re going to build a hydroponics system, it’s best to begin with a
container to use as a reservoir. For homemade systems, it’s best to use a fish
tank or a similar object. Once you find a suitable reservoir, you must paint it
black. The black pain will make your reservoir light proof, because if light
enters the reservoir it will promote the growth of algae. It is also a good idea
to score a line on your reservoir once it is painted( use a knife, and scratch
off paint in a straight line from top to bottom), which allows you to monitor
the amount of water in your reservoir. Some people may not have to score their
reservoir if they use a floater (Styrofoam), which indicates the amount of water
in the reservoir by sinking. However, the line will give a view of the nutrient
solution level.

Styrofoam should be used in your homemade reservoir. Before installing the
Styrofoam into your reservoir, you should use a tape measure to measure the
reservoir, from inside of the reservoir from one end to the other. Once your
reservoir is measured, cut the Styrofoam 1/4" smaller than the size of the
reservoir. The Styrofoam should fit nicely into your reservoir, and have enough
room to adjust to changing water levels. Making your own hydroponics system also
requires you use net pots, and you should cut holes in the Styrofoam for the
placing of the net pots. A hole should also be cut into one end of the Styrofoam
to allow for the airline to run into the reservoir.

When creating your own hydroponics system, it is also important to consider how
many plants you want to grow. The amount of plants grown should depend on the
size of the garden you build and the types of crops grown. Plants should also be
space appropriately so each plant receives a generous amount of light. It’s also
important to choose a strong pump for your hydroponics system. A strong pump
should be able to provide enough oxygen to sustain plants. It’s best to employ
the help of a professional when choosing a pump from a hydroponics supply store.
Giving the professionals information about the size of your reservoir should
make it easier for them to make a recommendation.

After installing a pump attach an airline to the pump and attaching an air stone
to the other end of the line. It’s important to make sure your airline is long
enough to travel from the pump into the bottom of the reservoir. If the airline
is not this long, then it should float in the middle so oxygen bubbles can get
to the roots. The line should also be the right size of the pump you choose, and
most pumps come with the right size airline. It’s advisable to use a one-gallon
bottle to fill your reservoir, which allows you to figure the capacity of your
reservoir.

Lighting is very important if you’re building a hydroponics system indoors. If
the system is inside, you’ll have to provide artificial lighting for your plants
to thrive. The size of the garden will determine how many light fixtures and how
many watts will be needed to provide proper light. It’s a good idea to visit a
lighting store, where you will be able to receive more information on lights to
use for your system. When plants are in growth phase, they will need high
intensity discharge lamps. When plants are in bloom, high-pressure sodium lights
increase yields and will grow denser and heavier flowers. Using fluorescent
lighting is also an option, but fluorescent lights don’t offer the same amount
of lumens as the others. Fluorescent lights are better suited for starters and
seedlings and for growers with ventilation problems. Fluorescent also burns
cooler than other lights, which allows you to place your plant closer to the
light source without damaging them

Paul Lavakis has been an avid gardener and since discoverring Hydroponics has
been a experimenting and evaluating the best ways to grow almost any fruit or
vegetable without soil For More Information Please Click here

www.AmazingHydroponicSecrets.com

Feel free to reproduce this article to your own website/ ezine list. Ensure that
the bio box is listed as is.

© Paul Lavakis – All Rights reserved

Be Sociable, Share!

Filed under: hydroponic systems

Like this post? Subscribe to my RSS feed and get loads more!